Capacity		2000V A/1800W
Topology		True online double-conversion, Pure Sine Wave
INPUT
Voltage Range	Low Line Transfer	160/140/120/110V AC ±5% (based on load percentage 100%-80%/ 80%-70%/70%-60%/60%-0)
	Low Line Comeback	175/155/135/125V AC ±5%
	High Line Transfer	300V AC ±5%
	High Line Comeback	290V AC ±5%
Frequency Range		40Hz~70Hz
Phase		Single phase with ground
Power Factor Correction		≥0.99 @ nominal voltage (100% load)
OUTPUT
Output Power Factor		0.9
Output Voltage (AC Mode)		240V AC (Selectable 200/208/220/230/240V AC)
Voltage Regulation (Batt. Mode)		± 1%
Frequency Range (Batt. Mode)		50Hz or 60Hz ±1Hz
Current Crest Ratio		3:1 (max.)
Transfer	AC Mode to Batt. Mode	0
	Inverter to Bypass	4ms (Typical)
Waveform (Batt. Mode)		Pure Sine Wave
EFFICIENCY
ECO Mode (Advanced)		97%
Battery Mode		87%
BATTERY
Battery Number (12V x 9AH)		x4
Typical Recharge Time	4 hours recover to 90% capacity (for the standard model only)
Charging Current (max.)	Standard Models - 1.5Amp. Long Run Models - 1/2/4/6Amp selectable (factory default is 6Amp)
PROTECTION
Full Protection	Overload, discharge, thermal, short circuit and overcharge protection
Surge Protection		984 Joules/22000 Amps
COMMUNICATIONS AND MANAGEMENT
Interface	USB or RS232 as standard, Intelligent slot for PSSNMP, PSModbus or PSAS400 dry contact
Software	PowerShield® NetGuard® software - supports Windows-based operating systems, Linux, Unix and Mac
LCD Display/Alarm	UPS Status, Load & Battery Level, Input/Output Voltage, Batt. Time Remaining and Fault Indicators
Audible Alarm	Battery Mode, Bypass Mode, Low Battery (Batt. Mode), Fault, Overload
PHYSICAL
Dimension, (D x W x H)		480 x 438 x 88mm
Weight		19.5kg
OPERATING ENVIRONMENT
Temperature		0°C~40°C
Humidity		20% - 90% (RH Non-condensing)
Noise Level		< 50dBA @1m
COMPLIANCE
Safety / EMC / RoHS	EN62040-1-1 2003, IEC60950-1-1 / EN62040-2 2006 / Directive 2011/65/EU