NETSYS G.Fast Slave Modem with 4 Gigabit Point to Point LAN Ports.

Model: NV-450S

NETSYS G.Fast Slave Modem with 4 Gigabit Point to Point LAN Ports. Supports G.fast 106/212 Dual Wave, Up to 1Gbps of Symmetric Data Transmission. Delivers High-Speed

NV-450M/S is a managed G.fast point to point solution with four Gigabit LAN ports. It is compliant to ITU-T G.9700/9701 Standards and supports G.fast 106/212 dual wave profile, bandwidth is up to 1Gbps of symmetric data transmission and it is perfectly suitable for FTTpd/FTTN applications. NV-450M/S is a cost effective solution that delivers high-speed Internet access to end-users over existing copper wire infrastructure, not only NV-450M/S support future-proof super Vectoring (G.fast)compatibility, NV-450S itself also support Vectoring(VDSL2) and super Vectoring(VDSL35b), and this solution is designed to meet the ISPs requirements to cover end users in different range of loop / areas.

Connect The NV-450M(Master) And The NV-450S(Slave) To The Line
The objective for LAN extender is to pass high speed data over a twisted pair cable. In the setup, connect NV-450M(Master) to NV-450S (Slave) through phone wire(24~26 AWG) or line simulator or any other hardware representation of a cable network, with or without noise injection and crosstalk simulations.

Features:

  • Compliant with IEEE 802.3 / 802.3u / 802.3ab Ethernet Standard
  • Compliant with ITU-T G993.2 VDSL2 standard (NV-450S only)
  • Compliant with ITU-T G998.4 G.INP standard (NV-450S only)
  • Compliant with ITU-T G.9700/G.9701 G.fast standard
  • Backward compatible VDSL2/V35b (NV-450S only)
  • Support 106a/b & 210a/b dual G.fast band profile
  • Support super Vectoring for V35b / G.fast(NV-450S only)
  • Support Vectoring for VDSL2(NV-450S only)
  • Support High Bandwidth up to 1Gbps
  • Support USB 3.0 for connecting USB Dongle
  • Support static routing for IPv4 and IPv6 forwarding(NV-450S only)
  • Mac Address based filtering
  • Support 8 queue MFC/DSCP both type QoS
  • Support HTTP/HTTPS web management
  • Support SSL security
  • Support remote management and monitor
  • Support configuration backup and restore
  • On board surge protection for Line port
  • Support bridge(switch) / Router mode(NV-450M bridge mode only)
  • Support Dual Firmware Image Backup
  • Support RJ-11 / Terminal block combo line port
  • Support NTP Time Server.
  • Support TR-069.
  • On board POTS/ISDN splitter
  • Support Jumbo frame(MTU) up to 1600 bytes

Subscribe to our newsletter