Absolute Maximum Ratings
PARAMETER	SYMBOL	MIN	MAX	UNITS	NOTE
Storage Temperature	TS	-40	85	ºC
Supply Voltage	Vcc	-0.5	4.0	V
Input Voltage	VIN	-0.5	Vcc	V
Output Current	Io		50	mA
Operating Current	IOP		400	mA
Recommended Operating Conditions
PARAMETER	SYMBOL	MIN	MAX	UNITS	NOTE
Case Operating Temperature	Tc	0	70	ºC	CL-SFP+ ER 40
Case Operating Temperature	Tc
Supply Voltage	Vcc	3.1	85	V
Supply Current	ITX + IRX		250	mA

Transmitter Electro-optical Characteristics
Vcc = 3.1 V to 3.5 V, TC = 0 ºC to 70 ºC
PARAMETER	SYMBOL	MIN	TYP.	MAX	UNITS	NOTE
Output Optical Power (50/125µm fiber, NA=0.20) (62.5/125µm fiber, NA=0.275)	P out	-6		-0.5	dBm	Average
Extinction Ratio	ER	3.5			dB
Coupled Power Ratio	CPR	9			dB
Center Wavelength	λc	1510	1550	1570	nm
Spectral Width (RMS)	Δλ			1	nm
Rise/Fall Time, (20-80%)	Tℵf				ps
Relative Intensity Noise	RIN			-128	dB/Hz
Total Jitter	TJ			227	ps
Output Eye	Compliant with IEEE802.3z
Max. Pout TX-DISABLE Asserted	P OFF			-45	dBm
Differential Input Volta0	V DIFF	0.4		2.0	v
Receiver Electro-optical Characteristics
Vcc = 3.1 V to 3.5 V, TA = 0 ºC to 70 ºC (-20 ºC to 85 °C)
PARAMETER	SYMBOL	MIN	TYP.	MAX	UNITS	NOTE
Optical Input Power-maximum	P IN	+0.5			dBm	BER < 10-12
Optical Input Power-minimum (Sensitivity)	P IN			-18	dBm	BER < 10-12
Operating Center Wavelength	λc	1510		1565	nm
Optical Return Loss	ORL	12			db
Loss of Signal-Asserted	P A	-12			dBm
Loss of Signal-Deasserted	P D			-20	dBm
Differential Output Voltage	V Diff	0.5		1.2	V
Data Output Rise, Fall Time (20-80%)	T rf			0.35	ns
Receiver Loss of Signal Output Voltage-Low	RX_LOSL	0		0.5	V
Receiver Loss of Signal Output Voltage-High	RX_LOSH	2.4		Vcc	V