Absolute Maximum Ratings
PARAMETER	SYMBOL	MIN	MAX	UNITS	NOTE
Storage Temperature	TS	-40	85	ºC
Supply Voltage	Vcc	-0.5	4	V
Input Voltage	VIN	-0.5	Vcc	V
Output Current	Io		50	mA
Operating Current	IOP		400	mA
Recommended Operating Conditions
PARAMETER	SYMBOL	MIN	MAX	UNITS	NOTE
Case Operating Temperature	Tc	0	70	ºC	CL-SFP-WDM-10-31
Case Operating Temperature	Tc	-40	85	ºC	CL-SFP-WDM-10-31DD
Supply Voltage	Vcc	3.1	3.5	V
Supply Current	ITX + IRX		250	mA

Transmitter Electro-optical Characteristics
Vcc = 3.1 V to 3.5 V, TC = 0 ºC to 70 ºC (-40 °C to 85 °C)
PARAMETER	SYMBOL	MIN	TYP.	MAX	UNITS	NOTE
Output Optical Power (50/125pm fiber, NA=0.20) (62.5/125pm fiber, NA=0.275)	P out	-9		-3	dBm	Average
Extinction Ratio	ER	9			dB
Center Wavelength	λc	1270	1310	1355	nm
Spectral Width (RMS)	Δλ			2.5	nm
Rise/Fall Time, (20-80%)	Tℵf			260	ps
Relative Intensity Noise	RIN			-120	dB/Hz
Total Jitter	TJ			227	ps
Output Eye	Compliant with IEEE802.3z
Max. Pout TX-DISABLE Asserted	P OFF			-45	dBm
Differential Input Volta0	V DIFF	0.4		2.0	v
Receiver Electro-optical Characteristics
Vcc = 3.1 V to 3.5 V, TA = 0 ºC to 70 ºC
PARAMETER	SYMBOL	MIN	TYP.	MAX	UNITS	NOTE
Optical Input Power-maximum	P IN	-1			dBm	BER < 10−12
Optical Input Power-minimum (Sensitivity)	P IN			-21	dBm	BER < 10−12
Operating Center Wavelength	λc	1480		1580	nm
Optical Return Loss	ORL	14			db
Optical isolation	ISO			-21	dBm	=1480~1580nm
Loss of Signal-Asserted	P A			-20	dBm	=1480~1580nm
Loss of Signal-Deasserted	P D	-35			dBm
Differential Output Voltage	V Diff	0.5		1.2	V
Data Output Rise, Fall Time (20-80%)	T rf			0.35	ns
Receiver Loss of Signal Output Voltage-Low	RX_LOSL	0		0.5	V
Receiver Loss of Signal Output Voltage-High	RX_LOSH	2.4		Vcc	V