IEEE Standard	IEEE 802.3 10Base-T Ethernet
	IEEE 802.3u 100Base-TX and 100Base-FX Fast Ethernet
	IEEE 802.3x Flow Control and Back Pressure
	IEEE 802.3z 1000Base-X Gbit/s Ethernet over Fiber- Optic
Switch Architecture	Back-plane (Switching Fabric) :
	1.2Gbps(IFS-402F)
	1.6Gbps (IFS-800)
	5.6Gbps (IFS-802GS)
	Full wire-speed
Data Processing	Store and Forward
Transfer Rate	14,880pps for Ethernet port
	148,800pps for Fast Ethernet port
	1,488,000pps for Giga Ethernet port
Flow Control	IEEE 802.3x flow control, back pressure flow control
Provides Broadcast Storm Protection	Present, Enable /Disable set by DIP SW ( IFS-800)
MAC Address Table	2K (FS-800)
Packet Buffer Size	448Kbit (IFS-800)
Network Connector	4X RJ-45, 2 Fiber (IFS-402F)
	8x RJ-45 (IFS-800)
	8x RJ-45, 2 SFP (IFS-802GS)
	RJ-45 Port:	Auto MDI/MDI-X function, 10/100Base-TX
		Auto negotiation speed, Full/Half duplex
	Fiber Port : 100Base-FX SC/ST, Multi/Single Mode
	SFP Port : 1000Base-X
Network Cable	10Base-T: 2-pair UTP/STP Cat. 5 cable
	EIA/TIA-568 100-ohm (100m)
	100Base-TX: 2-pair UTP/STP Cat. 5 cable
	EIA/TIA-568 100-ohm (100m)
	Fiber Cable (Multi-mode): 50/125um~62.5/125um
	Fiber Cable (Single-mode): 8/125um~10/125um
	Wavelength: 1310nm (Multi-mode/Single-mode)
	Available distance:	2KM (Multi-Mode)
		30KM (Single-Mode)
		50KM (Single Mode )
	SFP: Distance depend on SFP Fiber Transceiver
Protocol	CSMA/CD
LED	Per unit: Power 1 (Green), Power 2 (Green), Fault (Amber)
	RJ-45 Per port: Link/Active (Green), Speed 100 (Yellow)
DIP SW	DIP 1	OFF : Enable power failure alarm
		ON : Disable
	DIP 2	OFF : Enable broadcast storm protection
		ON : Disables broadcast storm protection
Reverse Polarity Protection	Present
Overload Current Protection	Present
Power Supply	Redundant Dual DC 12/24/48V (9.6~60VDC) Input power (Removable Terminal Block )
	Provides DC Power JACK adapter cable for external power supply
Power Consumption	3.9W (IFS-800)
Alarm Relay Contact	Relay outputs with current carrying capacity of 1 A @24VDC, NC
Removable Terminal Block	Provides 2 Redundant power, Alarm relay contact, 6 Pin
Operating Temperature	-10 ~ 60°C (IIFS-800)
	-40 ~ 75°C (IIFS-800-E
Operating Humidity	5% to 95% (Non-condensing)
Storage Temperature	-40 ~ 85°C
Housing	Rugged Metal, IP30 Protection and Fanless
Dimensions	1 106 x 31.6 x 142mm (D x W x H) (IFS-800)
Weight	0.43kg (IFS-800)
Installation Mounting	DIN Rail mounting or wall mounting
MTBF	552,587Hrs (IFS-800) (MIL-HDBK-217)
Warranty	5 years
Certification
EMC/EMS	CE
EMI (Electromagnetic Interference)	FCC Part 15 Subpart B Class A,CE EN55022 Class A
Railway Traffic	EN50121-4
Immunity for Heavy Industrial Environment	EN61000-6-2
Emission for Heavy Industrial Environment	EN61000-6-4
EMS	EN61000-4-2 (ESD) Level 3, Criteria B
	EN61000-4-3 (RS) Level 3, Criteria A
	EN61000-4-4 (Burst) Level 3, Criteria A
	EN61000-4-5 (Surge) Level 3, Criteria B
	EN61000-4-6 (CS) Level 3, Criteria A
	EN61000-4-8 (PFMF, Magnetic Field) Field Strength: 300A/m, Criteria A
Safety	UL60950-1 (Pending)
Shock	IEC 60068-2-27
Freefall	IEC 60068-2-32
Vibration	IEC 60068-2-6