IEEE Standard |
IEEE 802.3 10Base-T Ethernet |
IEEE 802.3u 100Base-TX, 100Base-FX, Fast Ethernet |
IEEE 802.3ab 1000Base-T Gbit/s Ethernet over twisted pair |
IEEE 802.3z 1000Base-X Gbit/s Ethernet over Fiber-Optic |
IEEE 802.3x Flow Control and Back Pressure |
Switch Architecture |
Back-plane (Switching Fabric): 12Gbps |
(IGS-402S Full wire-speed |
Data Processing |
Store and Forward |
Flow Control |
IEEE 802.3x flow control, back pressure flow control |
Provides Broadcast Storm Protection |
Present, Enable / Disable set by DIP SW |
Jumbo Frame |
10K Bytes |
|
MAC Address Table |
8K |
|
Packet Buffer Size |
1Mbits |
|
Network Connector |
4 x RJ-45 |
|
10/100/1000Base-TX auto negotiation speed, Auto MDI/MDI-X function, Full/Half duplex |
2 100/1000Base-X SFP connector (IGS-402S) |
Network Cable |
UTP/STP above Cat. 5e cable |
EIA/TIA-568 100-ohm (100m) |
Fiber Cable (Multi-mode): 50/125um, 62.5/125um |
Fiber Cable (Single-mode): 9/125um |
Protocols |
CSMA/CD |
|
LED |
Per unit: Power 1 (Green), Power 2 (Green), Fault (Amber) |
Per RJ-45 port : Link/Active (Green), Speed 10 (OFF), 100 (Green), 1000 (Yellow) |
Fiber Per port: Link/Active (Green) |
DIP SW |
DIP 1 |
ON : Disable power failure alarm |
OFF : Enable power failure alarm |
DIP 2 |
ON : Disables broadcast storm protection |
OFF : Enable broadcast storm protection |
DIP 3 |
ON : Fiber 2 for 100Base-FX SFP |
OFF : Fiber 2 for Gigabit SFP (IGS-402S) |
DIP 4 |
ON : Fiber 1 for 100Base-FX SFP |
OFF : Fiber 1 for Gigabit SFP (IGS-402S) |
Reserve Polarity Protection |
Present |
|
Overload current protection |
Present |
|
Power Supply |
Redundant Dual DC 12/24/48V (9.6~60VDC) Input power (Removable Terminal Block ) |
Provide DC Power JACK adapter cable for external power supply |
Power Consumption |
7.9W (IGS-402S) |
|
Alarm Relay Contact |
Relay outputs with current carrying capacity of 1 A @24VDC |
Removable Terminal Block |
Provides 2 Redundant power, Alarm relay contact, 6 Pin |
Operating Temperature |
-10 ~ 60°C (IGS-402S) |
-40 ~ 75°C (IGS-402S-E) |
Operating Humidity |
5% to 95% (Non-condensing) |
Storage Temperature |
-40 ~ 85°C |
|
Housing |
Rugged Metal, IP30 Protection, Fanless |
Dimensions |
106 x 62.5 x 134.8 mm (D X W X H) |
Weight |
0.84kg (IGS-402S) |
Installation Mounting |
DIN Rail mounting or wall mounting |
MTBF |
438,031 Hours (IGS-402S) (MIL-HDBK-217) |
Warranty |
5 years |
|
Certification |
|
|
EMC/EMS |
CE |
|
EMI (Electromagnetic Interference) |
FCC Part 15 Subpart B Class A,CE EN55022 Class A |
|
|
|
Railway Traffic |
EN50121-4 |
|
Immunity for Heavy Industrial Environment |
EN61000-6-2 |
|
Emission for Heavy Industrial Environment |
EN61000-6-4 |
|
EMS |
EN61000-4-2 (ESD) Level 3, Criteria B |
EN61000-4-3 (RS) Level 3, Criteria A |
EN61000-4-4 (Burst) Level 3, Criteria A |
EN61000-4-5 (Surge) Level 3, Criteria B |
EN61000-4-6 (CS) Level 3, Criteria A |
EN61000-4-8 (PFMF, Magnetic Field) Field Strength: 300A/m, Criteria A |
Safety |
UL60950-1 |
|
Shock |
IEC 60068-2-27 |
|
Freefall |
IEC 60068-2-32 |
|
Vibration |
IEC 60068-2-6 |
|