Rating (VA/W) 3000V A / 2700W
Format RT3U
Electrical Characteristics
Technology Line-Interactive High Frequency (Pure Sinewave, Booster + Fader)
Input voltage and frequency ranges 160V-294V (adjustable to 150V-294V) 47 to 70Hz (50Hz system),
Without using batteries 56.5 to 70Hz (60 Hz system), 40Hz in low-sensitivity mode
Output voltage and frequency 230V (+6/-10 %) (Adjustable to 200V / 208V / 220V / 230V / 240V), 50/60Hz +/- 0.1 % (autosensing)
Connections
Input 1 IEC C20 (16A) socket
Outputs 8 IEC C13 (10A) sockets,
1 IEC C19 (16A) socket
Remotely controlled sockets 2 groups of 2 x IEC C13 (10A)
Additional outputs with Hot Swap MBP 4 AUS 10A + 1 IEC 16A sockets or 6 IEC 10A sockets or terminal blocks (HW version)
Additional outputs with FlexPDU 6 AUS 10A + 1 IEC 16A sockets or 12 IEC 10A sockets
Batteries Typical backup times for 50 and 70% load*
5PX 14/9 mins
5PX + 1 EBM 66/38 mins
5PX + 4 EBM 213/121 mins
Battery management ABM® & Temperature compensated charging method (user selectable), Automatic battery test, deep discharge protection, automatic recognition of external battery units
Interfaces
Communication ports 1 USB port + 1 RS232 serial port and relay contacts (USB and RS232 ports cannot be used simultaneously)
+ 1 mini terminal block for remote ON/OFF and Remote Power Off
Communications card slots 1 slot for NMC Minislot card or NMC ModBus/JBus or MC Contacts/Serial
Operating conditions, standards and approvals
Operating temperature 0°C ~ 40°C
Noise Level < 50dBA
Performance - Safety - EMC IEC/EN 62040-1-1 (Safety), IEC/EN 62040-2 (EMC), IEC/EN 62040-3 (Performance), C-Tick
Approvals CE, CB report, TÜV
Dimensions W x D x H / Weight
UPS Dimensions (mm) 441 x 497 x 130.7mm
UPS Weight (kg) 37.33kg
Customer Service & Support
Warranty 3 years on electronics, 2 years on batteries