IR Module
Power Supply	DC 12V/250mA, supplied from connected IR6000 box
IR Input	1x 3.5mm jack connector for IRCV-3 receiver (3 conductor plug) 1x 3.5mm jack connector for IR-CV-4 receiver (4 conductor plug)
IR Emitter Output	4x 3.5mm jack connector for IR-EM-3 Emitter 1x 2.5mm jack connector for IR-Blaster
RJ45 Port	Extra RJ45 IR Receiver can be connected to this input or you can use the cat cable together with the RJ45 IR Receiver to extend the IR signal reception
Status Indication	Green LED for On/Off indication
IR Signal Indication	Blue indication LED
Power Indication	Red indication LED
Dimensions	55 x 85 x 23mm
IR Receiver (IR-CV-4, IR-CV-5)
Frequency Range	25 ~ 60KHz
IR Reception Range	±10m
Status Indication	Green LED for system On/Off indication
IR Signal Indication	Blue indication LED
IR Reception Angle	90º (+45º/-45º from center)
IR Receiver Connection	1x 3.5mm jack plug (4 conductor plug), 1x RJ45 connector
Cable Length	1x 2m (IR-CV-4), 1x 1m (IR-CV-5) extendable up to max 100m
Dimensions	25 x 14 x 9mm
IR Emitter (IR-EM-3)
Connection	3.5m jack plug (mono)
IR LEDs	2x IR emitter LEDs
Cable Length	2m
Peak Forward Current	100mA
Forward Voltage Max	1.5V
Peak Wavelength	940nm
Dimensions	22 x 16 x 8mm
Power Adapter
Input	AC 100V ~ 240V
Output	DC 12V/250mA
DC Plug	5.5 x 2.1mm
IR Blaster
Connection	2.5mm jack plug (mono)
IR LEDs	1x IR blaster LED
Cable Length	2m
IR Transmitting Range	1m
IR Transmitting Angle	90° (+45°/-45° from center)